Monstera coaster plant
por Cosmic_Cupcake en Printables
A Monstera plant with detachable leaves that can serve as drink coasters.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Cosmic_Cupcake.
Archivos (13)
- leaf 1 (print 2x).stl STL · 161 KB
- leaf 2 (print 2x).stl STL · 183 KB
- leaf 3 (print 2x).stl STL · 173 KB
- leaf 4 (print 2x).stl STL · 233 KB
- stem 1.stl STL · 36 KB
- stem 2.stl STL · 34 KB
- stem 3.stl STL · 33 KB
- stem 4.stl STL · 33 KB
- stem 5.stl STL · 32 KB
- stem 6.stl STL · 33 KB
- stem 7.stl STL · 33 KB
- stem 8.stl STL · 33 KB
- baseplate adapter.stl STL · 212 KB
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 3,062
- Publicado
Sobre este modelo
A Monstera plant with detachable leaves that can serve as drink coasters. -Uses 10x3mm ferrite magnets to attach the leaves. (I am using ferrite so one can place/spill hot drinks on them without risking demagnetisaton) <!> -Check the print orientation, depending on your material choice / bridging performance you might want to flip the leaf models on their head so the magnet hole prints cleanly. -Since I've used a random used flower pot for my creation, my baseplate will probably not fit whatever is available to you. I've included an adapter plug that you should be able to design your own pot/baseplate around. It's 16mm thick with a step in the middle. top diameter is 68mm, bottom diameter is 64mm.
Commercial license available here: https://www.printables.com/model/968855-useful-plants-commercial-pack
Descripción original del autor, publicada en Printables.
