Monitor Mounting Solution Using IKEA SKÅDIS

I needed to mount my UPerfect monitor vertically. It already had a VESA mount, but since I also use it while traveling, I wanted a solution that would allow me to easily remove it from the monitor stand. I used an IKEA SKÅDIS board, cut it to size, and combined it with a SKÅDIS VESA 100x100 mount. I then modified the mount to fit my monitor's mounting setup:

The UPerfect is now mounted to the monitor stand and can be easily removed by simply sliding it upwards. I also needed an additional monitor for my Minisforum Mini PC. This one is mounted to the arm of my existing 27-inch monitor using a custom mounting plate designed for the SKÅDIS board. Spacer options For the UPerfect monitor, I included an option with thinner spacers. I needed the thicker ones because some of my cables use angled adapters and run behind the monitor (HDMI and USB-C power). I also added a thinner spacer option for the Arzopa monitor. A small note about the mounting points The bottom mounting points for the UPerfect are rounded to match the rounded edges of the SKÅDIS board. I'm not sure how this will affect everyone else's setup, but the board itself can easily be cut to accommodate the rounded corners if needed.

I used 3x12mm T10 screws.