Molle Clip Vermintide 2 Sienna Fuegonasus

This is a molle attachment representing the character Sienna Fuegonasus from the game Vermintide 2. It is installed by twisting and carefully forcing it into the molle. I made it originally for my own use so the first and second plate are designed for people with no color changing system as i don´t own one. The thrid plate should work for color changing systems, but im not quite sure about that. Should there be a problem please feel free to post your profile in the comments or let me know if there is a easy change i should make. For the assembly you will need some superglue, since there are two parts to the finished model. The assembly is pretty straight forward and works as follows: First print plate 2 in the color you wan´t the inner part to be (in my case i chose red). Then print the first plate till the pause and insert the piece from plate 2 without removing the (in my case black) outer part with some superglue. There is really no need to use much just the smallest drop is enought as it is later held in place by the material added and the glue mainly acts as a binder to prevent the fans from blowing the light part away in the process. Let it dry for a minute and continue the print. I hope all this pausing and colorchanging works in the file as this is my first project utilising these mechanics. Please let me know if anything doesn´t work and give me feedback on the model