Modular shower soap dish

A modular dish for better and cleaner storage of your hard shampoo and shower soap. The files include two different dish shapes, one for round products and one for square products. You can plug together as many as you need. You can use it either with the drip tray or without depending on your shower organization preferences.

Inner size: 40mm x 40mm x70mm

Goes nicely with lush hard shampoos and any other product I have come across.

Print settings Required build volume: 100mm x 100mm x 100mm Material usage: 40g per dish, 12g per tray Print time: 3-4h per dish, 1h -2h per tray

Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0,28 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none, if you have bad bed adhesion – use a brim for the dish

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.