Modular PC Fan Coupler – 120mm & 140mm
por dinamitebla en Printables
Simple connectors that let you combine your fans in endless configurations using M4 bolts or normal fan screws
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo; si distribuyes versiones modificadas deben ir con la misma licencia y sus fuentes.
Al descargar aceptas respetar la licencia y dar crédito a dinamitebla.
Archivos (6)
- Categoría
- Tecnología
- Formatos
- STEP
- Descargas
- 6
- Publicado
Sobre este modelo
Simple, inexpensive connectors that let you combine your fans in endless configurations. The design is compatible with 120 mm and 140 mm fans with a 7.5 mm distance between the mounting hole centers and the outer edge of the frame. You can use either M4 screws or standard PC fan screws, which thread directly into the plastic housing.
If you're not mounting the fans to a flat surface, I recommend using connectors on both sides to prevent the fans from bending apart.
You can secure fans on both sides using standard PC fan screws or M4 × 35 mm bolts and nuts. If your fans are not the standard 25 mm thick, make sure to use bolts of the appropriate length.
Descripción original del autor, publicada en Printables.
