Modular Cobblestone & Forest Floor Terrain Tiles – Free Sample (6" dovetail tiles)

Two free tiles from the Cobblestone & Forest Floor Tiles set by ZeroLayerStudio. Use them to test the dovetail joint, the scale and your print settings before you build a whole board.

What you get:

CFT_C2_A: half cobblestone, half forest floor; CFT_C1_A: one quarter cobblestone.

The tiles

152.4 mm (6 in) square, 6.2 mm tall, sized for 28–32 mm miniatures. Hand-designed cobblestones with pitted tops that catch a drybrush, and a forest floor with leaves, twigs, small rocks and grass tufts. Dovetail joints on every edge: tiles lock together sideways and lift apart easily. Any edge fits any edge, in any rotation.

Printing

No supports. Prints flat, textured side up 0.12 mm layers for the top. In Bambu Studio, Orca or PrusaSlicer, use a height range modifier: 0–4 mm at 0.2 mm, then 0.12 mm to the top Ironing off. Between 5 and 7 hours and 80 of PLA per tile on a Bambu Lab A1

The full set 17 tiles: five patterns from all cobblestone to all forest floor, three texture variants of each, plus a wooden hatch and an iron drain grate. Includes a reference layout and print list for a 3 × 3 ft board. https://cults3d.com/:5111129

If you print these, I’d love to see photos of your tiles.