Miniature Jewelry Wardrobe
por Schreibmaschine en Printables
A tiny wardrobe for your rings, earrings, and other small jewelry.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Schreibmaschine.
Archivos (26)
- Hook_Long_Narrow.stl STL · 13 KB
- Hook_Long_Mid.stl STL · 21 KB
- Hanger_Earrings_Large1.stl STL · 74 KB
- Hanger_Earrings_Plug1.stl STL · 78 KB
- Hanger_Earrings_Plug2.stl STL · 71 KB
- Hanger_Double_Med.stl STL · 70 KB
- Wardrobe_Bar.stl STL · 3 KB
- Hanger_Earrings_Plug3.stl STL · 65 KB
- Hanger_Double_Wide.stl STL · 70 KB
- Wardrobe_Back.stl STL · 12 KB
- Hook_Short_Mid.stl STL · 23 KB
- Hook_Long_Wide.stl STL · 22 KB
- Hanger_Earrings_Large2.stl STL · 87 KB
- Hanger_Blank2.stl STL · 66 KB
- Wardrobe_Bottom.stl STL · 5 KB
- Wardrobe_Drawer.stl STL · 7 KB
- Wardrobe_Bench.stl STL · 8 KB
- Hanger_Double.stl STL · 70 KB
- Hanger_Earrings.stl STL · 78 KB
- Hook_Short_Wide.stl STL · 24 KB
- Wardrobe_Right.stl STL · 41 KB
- Hook_Short_Narrow.stl STL · 13 KB
- Hanger_Center.stl STL · 69 KB
- Hanger_Blank1.stl STL · 68 KB
- Wardrobe_Left.stl STL · 41 KB
- Ring Wardrobe.3mf 3MF · 217 KB
- Categoría
- Moda y joyería
- Formatos
- STL, 3MF
- Descargas
- 1,065
- Publicado
Sobre este modelo
No need for supports. I created a variety of different hangers for different types of jewelry from rings, classic earrings, cufflinks, big hook, Ear Tunnels/Plugs and some blank ones you can modify and remix. Assembly - Clean up any elephant foot on the joint sockets and test fit the parts - Fit the bench into the back plate before attaching the sides and beam - Superglue into the sockets as you go - The Bench piece has a 5mm beam on the back and a 4mm beam on the front, it is important to put it in the right way around
- Slide the bottom panel in - Find the right combos of hook and hanger for each ring you want to hang and glue the hooks in place
Examples
Descripción original del autor, publicada en Printables.
