Mini Toolbox Storage Box 1.0

Version 2.0 is available now! Check it out here: Mini Toolbox Storage Box 2.0

Improvements over version 1.0:

- Double connectors/hinges keep the compartments level and make them more stable.

- Standard “stronger” connectors that have an improved print orientation. They need small supports, included in the print profile, that are easy to remove.

- The compartments are larger, and the bottom compartment no longer has a divider, leaving room for larger items.

- The connectors fit through the holes more easily.

- Stronger boxes with thicker walls.

- Rounded edges help reduce warping.

- The handle has a looser fit.

I recommend printing version 2.0, but version 1.0 is also still available:

This compact, 3D printable mini toolbox features a clever cantilever design for easy access to your tools or small items. It is easy to assemble, but you can download the assembly guide, if needed.

- For the connectors, please use the print profile with stronger connectors (RECOMMENDED!). These connectors are rotated 90° from the original design, so the layer lines align with the tabs, making them stronger. The connectors need supports this way, but they are easy to remove.

- A print profile for a handle with a looser fit is also available.

This compact, 3D printable mini toolbox features a clever cantilever design for easy access to your tools or small items. It is easy to assemble, but you can download the assembly guide, if needed.

There is a large version (3-layer) and a small version (2-layer). The small version consists of mostly the same parts, except for a smaller handle and the middle compartments are not included. Also, you need 4 connectors instead of 8.

Dimensions: Large version: ±210x150x154mm (WxDxH) - handle not included Small version: ±210x150x116mm (WxDxH) - handle not included

Filaments used: Bambu PLA Basic Black (10101) Bambu PLA Metal Oxide Green Metallic (13500) Bambu PLA Metal Cobalt Blue Metallic (13600)

Tips: - If you have problems with warping, use an adhesive spray or add a brim to the models. - Use ‘PLA Basic’ or ‘PetG’ (or stronger) for the connectors. - Don't use ‘PLA Silk’ or ‘PLA Matte’ for the connectors, as they break and wear out too easily. - Add 2 strokes of ‘Adhesive Foam Sponge Strip Roll’ (NC005) to the bottom compartments for more stability/less sliding (not necessary for functionality)