Mini Table Saw
por RCMakerLab en Printables
Very useful mini table saw for hobbyists
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a RCMakerLab.
Archivos (14)
- Main Box PLA - Infill-40_Wall-4.stl STL · 1,3 MB
- GT2 20T - GT2 20T Pulley ABS - Infill-100.stl STL · 342 KB
- Heat insulation part PETG.stl STL · 87 KB
- Part 2 PLA Infill-20.stl STL · 113 KB
- GT2 40T - GT2 40T Pulley ABS - Infill-100.stl STL · 400 KB
- Motor Mount1 PLA or PETG Infill-50_Wall-4 & Support.stl STL · 544 KB
- Part 3 Cover - PLA Infill-20.stl STL · 2 KB
- Part 4 TPU.stl STL · 99 KB
- Motor Mount2 PLA or PETG Infill-50_Wall-4.stl STL · 344 KB
- Part 5 PLA Infill-20.stl STL · 57 KB
- Top Table PLA -Infill-40_Wall-4.stl STL · 438 KB
- Safety Push Rod PLA - Infill - 60.stl STL · 300 KB
- Part 1 PLA Infill-40_Wall-3.stl STL · 3,5 MB
- Tube TPU.stl STL · 2,6 MB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 2,710
- Publicado
Sobre este modelo
Many parts of the circle saw are designed for PLA (PLA+ or Tough PLA is recommended) filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. Apart from the standard settings, those required for the parts to be printed are stated in the part names. Settings not specified are standard slicer settings. A layer of 0.2 or 0.30 is suitable. The names and links of the materials required for the table saw are in the detail section below the video.
Descripción original del autor, publicada en Printables.
