Mini mic tripod for 5/8" (US) thread
Made this because the 3/8" thread standard used by other mic stands is too flimsy for 3d-printed threads (in my experience). Most US mic mounts have a 5/8" thread with a 3/8" adapter that you can remove.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a Ben K.
Archivos (1)
- mini mic stand tripod.stl STL · 932 KB
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 4
- Publicado
Sobre este modelo
Made this because the 3/8" thread standard used by other mic stands is too flimsy for 3d-printed threads (in my experience). Most US mic mounts have a 5/8" thread with a 3/8" adapter that you can remove.
Print upright without supports but obviously it needs GOOD BED ADHESION. My recommendation is PLA+ on a smooth PEI bed, prints flawlessly on my Prusa.
Made to sit on a desk/table: - Legs are 72mm from center (fill 144mm diameter circle) - Height with thread: 68mm - 8mm of exposed thread
Descripción original del autor, publicada en Thangs.
