Milk Carton
por Layersingreen en MyMiniFactory
Cute little container with a Moo tag! printed in parts and put together, can be printed without AMS by switching out colors during printing 🐄🐄
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalMyMiniFactory - Credit - Noremix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Layersingreen.
Archivos (1)
- Milk_carton_container.zip ZIP · 2,7 MB
- Categoría
- Hogar
- Formatos
- ZIP
- Descargas
- 180
- Publicado
Sobre este modelo
Cute little container with a Moo tag! printed in parts and put together, can be printed without AMS by switching out colors during printing 🐄🐄
Design contains Milk Carton ONLY
⚙️Slicer Settings
- 100% cow fits in 100% carton
- 3 walls, 15% gyroid or 3D honeycomb infill, no supports required
- USE A BRIM for the top of the carton! I recommend inner and outer brim with 0.1 mm brim gap
- Tested down to 60% scale. If scaling down print **the top of the carton with 0.16 layer height** to avoid hanging layers.
Ive included a tolerance test for the top of the carton. A tolerance test is a quick check (3 grams) to make sure the tops of the carton will be a good fit with the bottom. + + ⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - Click here📌
Descripción original del autor, publicada en MyMiniFactory.
