Mid-Century Modern Planter Pot, with Drainage Holes, Drip Tray, Multiple Sizes
por Jordan Proctor Designs en Printables
A mid-century modern planter pot in multiple sizes, each with a custom-fitted drip tray.
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a Jordan Proctor Designs.
Archivos (20)
- MCM Planter XL.stl STL · 1,7 MB
- Tray XL.stl STL · 277 KB
- MCM Planter L.stl STL · 1,5 MB
- Tray L.stl STL · 264 KB
- MCM Planter M.stl STL · 1,5 MB
- Tray M.stl STL · 279 KB
- MCM Planter S.stl STL · 1,5 MB
- Tray S.stl STL · 271 KB
- XL (6in) - Mid-Century Modern Planter.stl STL · 1,3 MB
- XL (6in) - Tray.stl STL · 197 KB
- Large (5in) - Mid-Century Modern Planter.stl STL · 1,3 MB
- Large (5in) - Tray.stl STL · 199 KB
- Medium (4in) - Mid-Century Modern Planter.stl STL · 1,3 MB
- Medium (4in) - Tray.stl STL · 199 KB
- Small (3in) - Mid-Century Modern Planter.stl STL · 1,3 MB
- Small (3in) - Tray.stl STL · 184 KB
- MCM Small - 3in (No holes).stl STL · 1,0 MB
- MCM Medium - 4in (No holes).stl STL · 1023 KB
- MCM Large - 5in (No holes).stl STL · 1,1 MB
- MCM XL - 6.5in (No holes).stl STL · 1,1 MB
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 17,901
- Publicado
Sobre este modelo
(2.0) Update: New versions to counteract the “benchy hull line” - If you're not sure what I mean by “benchy hull line”, read this article. - I have rounded out the bottom interior of the planter to counteract the slight layer shift our indentation that occurs on the exterior wall as the printer completes the top layers of the bottom interior of the planter. - I have also adjusted my suggested print settings to reflect my current preferences.
Mid-Century Modern Planter Pot This mid-century modern planter is the perfect size for small to medium sized succulents, cacti, or other houseplants. The unique design balances form with function, including drainage holes and an optional, custom-fitted drip tray. I have posted files for four sizes, small through XL. The pictured planter is the "XL" size. Small: 3" height, 3" opening Medium: 4" height, 4" opening Large: 5" height, 5" opening XL: 6" height, 6.5" opening Print Settings I Used: - 0.2mm layer height - 10% gyroid infill - 3 walls
This model is not for commercial use. If you are interested in selling your 3D prints of my models, please refer to my Printables Club! If you like this design, consider leaving a tip! I'm a university student that designs planters on the side, so anything helps! https://www.paypal.me/theprintedplanter
Descripción original del autor, publicada en Printables.
