Menger Sponge - Easy to Print
A 4th degree Menger Sponge that can easily be printed in 2 halves and then glued or held together with printed pins
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Nathan F.
Archivos (15)
- 1stDegreeFull.stl STL · 5 KB
- 1stDegreeFullFlat.stl STL · 5 KB
- 2ndDegreeFull.stl STL · 63 KB
- 2ndDegreeFullFlat.stl STL · 63 KB
- 3rdDegreeFull.stl STL · 1,0 MB
- 3rdDegreeFullFlat.stl STL · 1,0 MB
- 4thDegreeCutCorner.stl STL · 759 KB
- 4thDegreeCutHalf.stl STL · 10,3 MB
- 4thDegreeCutQuarter.stl STL · 2,9 MB
- 4thDegreeCutThird.stl STL · 4,2 MB
- 4thDegreeFull.stl STL · 18,8 MB
- 4thDegreeFullFlat.stl STL · 18,8 MB
- LockingPin.stl STL · 319 KB
- MengerSponge.3mf 3MF · 7,4 MB
- PinTool.stl STL · 30 KB
- Categoría
- Educación
- Formatos
- STL, 3MF
- Descargas
- 105
- Publicado
Sobre este modelo
A 4th degree Menger Sponge that can easily be printed in 2 halves and then glued or held together with printed pins
Files Include: - Flat and standing on corner version of 1st-4th degree Menger Sponges - 4 cut versions of the 4th degree Menger Sponge (for easier printing and to see the cool patterns) - Locking pin that can connect 3rd and 4th degree pieces together - Pin tool to help with the removal of the locking pins
Print Settings: - It is best to print the sponges diagonally, but this does require more support. I suggest you print the “half” version twice and either glue them together or use the pins to hold them together. - All of the “cut” versions don't need support so long as they are printed on the cut face. - Print the smaller sponges first to ensure your support settings are good before printing the full 4th degree sponge.
Bonus:
Print my Kinetic Cube Holder (https://thangs.com/designer/NateT_Bird/3d-model/Cube%20Holder%3A%20Kinetic%20Desk%20Sculpture-1421182) at 116% scale to display the full 4th degree sponge in a cool way!
Happy Printing!
Descripción original del autor, publicada en Thangs.
