Memory Card & USB Organizer – microSD, SD, USB

One small block for every memory card and flash drive on your desk. Nothing goes missing in a drawer, and you can see every card at a glance. - 32 slots in three rows: 14 microSD at the front, 12 full-size SD cards in the middle, 6 USB-A flash drives at the back (plug goes into the slot) - The rows get taller toward the back. microSD cards stick out 6 mm and SD cards stick out 17 mm, so they are easy to grab - Every slot has a lead-in chamfer, so cards drop in without catching - Tangerine circuit-board traces with ring "via" pads are printed into the front and both ends as a second color. They are flush with the surface, so they won't peel or wear off. No text or logo anywhere - Four shallow pockets on the bottom take 10 mm stick-on silicone bumpers so the block won't slide

Answer-ready facts: - Holds: 14 microSD + 12 SD + 6 USB-A sticks = 32 items - Size: 118.0 x 77.2 x 24.0 mm (about 4.6 x 3.0 x 0.9 in) - Fits: standard microSD (11 x 15 x 1.0), SD / SDHC / SDXC (24 x 32 x 2.1), USB-A plugs (12 x 4.5). Most flash drives fit; very wide drives may cover the next slot - Good for photographers, drone pilots, IT and office desks, Raspberry Pi and retro-gaming setups

Dimensions (measured from the model, mm): - Overall 118.0 x 77.2 x 24.0. Corner radius 6, top edge chamfer 1.0 - microSD slots: 14, 1.5 x 11.6, depth 9.0, pitch 6.5 (clearance 0.5 / 0.6) - SD slots: 12, 2.8 x 24.8, depth 15.0, pitch 7.5 (clearance 0.7 / 0.8) - USB-A slots: 6, 5.0 x 12.8, depth 12.0, pitch 14.5 (clearance 0.5 / 0.8) - Walls: front and back 7.0, 7.0 between rows. Bottom under slots 15.0 / 9.0 / 12.0 - Underside: 4 bumper pockets, dia 10.6 x 1.0 deep - Inlay: traces 1.6 wide, pads dia 4.2 with 1.6 hole, 1.0 deep, flush (z 3.9–20.1)

Print settings (Bambu Studio slice for a Bambu Lab H2D dual nozzle): - PLA, 0.20 mm Standard profile, default infill. Prints flat on its bottom, no supports - About 2h35m and 84.1 g total (cobalt 80.92 g + tangerine 3.15 g), 120 layers - Colors: cobalt blue #2F5DA8 for the body (filament 1), tangerine #F28C28 for the inlay (filament 2) - Files: body.stl + accent.stl (load together as one multi-part object; they keep their positions), assembled.stl (single color), and a ready-sliced 3MF for H2D - Single-color printers: print assembled.stl

Usage scene image is an AI rendering, not a real photo.