Mecha Test Model
3d printed mecha model. I made this as a test for 3d printing TPU polycaps for articulated joints. These models are intended to be printed on a filament printer. Files meant to be printed in TPU are labeled as such in the file names. Several parts are symmetrical and require 2 per complete model. Pa
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Liem P.
Archivos (28)
- Test_Mecha1-Ankle.stl STL · 66 KB
- Test_Mecha1-Arm_Lower.stl STL · 84 KB
- Test_Mecha1-Arm_Upper.stl STL · 54 KB
- Test_Mecha1-Arm_Upper_Shoulder.stl STL · 23 KB
- Test_Mecha1-Chest.stl STL · 119 KB
- Test_Mecha1-Foot.stl STL · 197 KB
- Test_Mecha1-Head.stl STL · 120 KB
- Test_Mecha1-Pauldron.stl STL · 10 KB
- Test_Mecha1-Pauldron_Mount.stl STL · 1,7 MB
- Test_Mecha1-Pauldron_Mount_Pivot.stl STL · 892 KB
- Test_Mecha1-Shins.stl STL · 514 KB
- Test_Mecha1-Shoulder_Joint.stl STL · 70 KB
- Test_Mecha1-TPU_Ankle_Foot_Polycap.stl STL · 50 KB
- Test_Mecha1-TPU_Ankle_LEg_Polycap.stl STL · 50 KB
- Test_Mecha1-TPU_Elbow_Polycap.stl STL · 19 KB
- Test_Mecha1-TPU_Knee_Polycap.stl STL · 19 KB
- Test_Mecha1-TPU_Neck_Polycap.stl STL · 50 KB
- Test_Mecha1-TPU_Shoulder_Chest_Polycap.stl STL · 50 KB
- Test_Mecha1-TPU_Thigh_Hip_Polycap.stl STL · 50 KB
- Test_Mecha1-TPU_Upper_ArmShoulder_Polycap.stl STL · 19 KB
- Test_Mecha1-TPU_UpperArm_Polycap.stl STL · 19 KB
- Test_Mecha1-TPU_Waist_Polycap.stl STL · 50 KB
- Test_Mecha1-TPU_Wrist_Polycap.stl STL · 50 KB
- Test_Mecha1-Waist.stl STL · 126 KB
- Test_Mecha1-HandL.stl STL · 89 KB
- Test_Mecha1-HandR.stl STL · 89 KB
- Test_Mecha1-ThighL.stl STL · 71 KB
- Test_Mecha1-ThighR.stl STL · 71 KB
- Categoría
- Miniaturas
- Formatos
- STL
- Descargas
- 341
- Publicado
Sobre este modelo
3d printed mecha model. I made this as a test for 3d printing TPU polycaps for articulated joints. These models are intended to be printed on a filament printer. Files meant to be printed in TPU are labeled as such in the file names. Several parts are symmetrical and require 2 per complete model. Parts that need not be printed twice are the head, chest, waist, and left and right hands and thighs. None TPU prints will require supports in order to print properly. Joints for the Elbows, Knees, Shoulder, and Pauldron Mounts will require 3mm polystyrene rod or 3mm filament to fit through the hole to assemble. Glue is required for the pauldron to stick to its mounting.
Descripción original del autor, publicada en Thangs.
