MC4 & EVO2 PV solar wrench (spanner)
por Fantomas en Printables
PV tool for use with both MC4 and EVO2 style solar connectors.⚠WARNING⚠ Tool was design based on connectors made by…
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Fantomas.
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 2,333
- Publicado
Sobre este modelo
ebay note: A 3D print of this this model is currently illegally sold @ https://www.ebay.ie/itm/314569335395 /314580358088 /314673977931
PV tool for use with both MC4 and EVO2 style solar connectors. ⚠WARNING⚠ Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands. Multifunctional spanner that can be used to: - hold connector nut - hold connector body - disconnect female and male pair
Please excuse the poor quality of my print, I had only a roll of old PET-G to work with. Print Settings ============== Printer: Craftbot+ Resolution: 0.2 Infill: 15-30% Filament: Nebula PET-G light brown
Notes:
As with most thin prints key to structural strength is number of walls, 4-5 should be sufficient, infill % doesn't matter as much. PET-G's springiness works nicely especially for the fork end of this tool (use it to disconnect mated connectors). How I Designed This Based on connectors made by Staubli / Multi-Contact ⚠WARNING⚠ Tool was design based on connectors made by Staubli/Multi-Contact, there is absolutely no guarantee it will be compatible with other brands.
Category: Hand Tools
Descripción original del autor, publicada en Printables.
