Maxda MX-5/Miata ND Throttle and Clutch Spacer
por Ola Bergström en Thingiverse
MF I wrote a very long and helpful description and thingiverse just made it all disappear when I tried to reference original creations. I won't write it again. You'll figure it out. But use M5 screws at most for the left retention screws on clutch spacer, might conflict with metal plate otherwise...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Ola Bergström.
Archivos (8)
- MX-5_ND_Throttle_and_Clutch_Spacers_15mm.stl STL · 2,9 MB
- MX-5_ND_Throttle_Spacer_15mm.stl STL · 178 KB
- MX-5_ND_Cluth_Spacer_15mm.stl STL · 2,8 MB
- MX-5_ND_Clutch_Spacer_Part_Bottom.stl STL · 531 KB
- MX-5_ND_Clutch_Spacer_Part_Side_Locking_Thing.stl STL · 99 KB
- MX-5_ND_Clutch_Spacer_Part_Top_Complete.stl STL · 97 KB
- MX-5_ND_Clutch_Spacer_Part_Top_Left_Angled_Side.stl STL · 81 KB
- MX-5_ND_Clutch_Spacer_Part_Top_Right_Straight_Side.stl STL · 115 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
MF I wrote a very long and helpful description and thingiverse just made it all disappear when I tried to reference original creations. I won't write it again. You'll figure it out. But use M5 screws at most for the left retention screws on clutch spacer, might conflict with metal plate otherwise. Tapping is needed. Widen holes on throttle as needed. They're supposedly same as OEM aluminum pedals, can't verify. Clutch based on ND miata clutch pedal spacer by salacious_sloth, available on other site. Throttle on ND Miata Gas Pedal Extension by miazdadude. Print in Nylon with MJF printer, nothing else. Drive fast.
Descripción original del autor, publicada en Thingiverse.
