Master Sword Test Print
por 3D Printing World en Thangs
This is the test print for the collapsing Master sword. Its 24mm high so what I do is change retraction setting every 8mm. Then I compare the changes until I achieve the best result. Each printer is going to be different but in my case for this blade I used a negative “extra restart” distance to red
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesNC LICENSES
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a 3D Printing World.
Archivos (1)
- MASTER SWORD-TEST PRINT.stl STL · 9 KB
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 1,963
- Publicado
Sobre este modelo
This is the test print for the collapsing Master sword. Its 24mm high so what I do is change retraction setting every 8mm. Then I compare the changes until I achieve the best result. Each printer is going to be different but in my case for this blade I used a negative “extra restart” distance to reduce the size of the layer seam.
If the three pieces are completely separate you should have a successful print.
Descripción original del autor, publicada en Thangs.
