Marblevator, Striker
por Greg Zumwalt en MyMiniFactory
In this model, I've combined a track similar to that used in my "Marblevator, My Fastest Yet" design with the robot in my "Executive Desktop Toy 2" design to create this model, "Marblevator, Striker". By pressing then quickly releasing the lever on the back side of the robot, an 11mm nylon sphere is
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Greg Zumwalt.
Archivos (20)
- Arms Axle.stl STL
- Arms.stl STL
- Axle Lever.stl STL
- Base Tower.stl STL
- Base.stl STL
- Bolt (M6 by 1 by 8).stl STL
- Bolt (M8 by 1.25 by 16).stl STL
- Bolt (M8 by 1.25 by 4).stl STL
- Bolt (M8 by 1.25 by 8).stl STL
- Bushing Left Armed.stl STL
- Bushing Left.stl STL
- Bushing Right.stl STL
- Head.stl STL
- Lever.stl STL
- Mallet.stl STL
- Robot Torso Left.stl STL
- Robot Torso Right.stl STL
- Shoulder.stl STL
- Spring.stl STL
- Track.stl STL
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 102
- Publicado
Sobre este modelo
In this model, I've combined a track similar to that used in my "Marblevator, My Fastest Yet" design with the robot in my "Executive Desktop Toy 2" design to create this model, "Marblevator, Striker". By pressing then quickly releasing the lever on the back side of the robot, an 11mm nylon sphere is propelled around the track and back to the beginning ready to be launched again.
As usual I probably forgot a file or two or who knows what else, so if you have any questions, please do not hesitate to ask as I do make plenty of mistakes.
Designed using Autodesk Fusion 360, sliced using Ultimaker Cura 14.12.1, and 3D printed in PLA on Ultimaker S5s.
Descripción original del autor, publicada en MyMiniFactory.
