Magnetic Dice Box, Tray, and Tower

This is a dice box, tower, and tray combo. It has a drawer for fitting 7 different types of dice (d4 d6, d8, d10, d10, d12, and d20) in a standard set. It can hold at least 7 of each type of dice (I used it with my set of 49 dice, 7 of each type.)

There are several holes for 8x1mm magnets, which facilitate keeping the drawer closed fully, as well as keeping the tower together when in use. See magnet direction pictures for polarity of magnets. Pick a direction on the magnets to call south or north, then keep it consistent.

I have included several versions with and without the designs. You will need a tray top, tray bottom, drawer, and each tower piece for a full set.

This print needs at least a 200mm bed! See printing details below for instructions on how to print a full 200mm object with Cura.

I printed using Hatchbox Wood Filament and using the online Wood Grain tool, then sanded and stained. I used this website to make the wood grain.

The tray bottom and top both have holes designed to fit 1.75mm filament to act as alignment pins when gluing together.

Tolerance around drawer is 0.3mm. If you are having issues, or your printer has a worse tolerance, I'd recommend printing the drawer at 99.5% scale.

The tray top has an extra depth of 2mm to allow for felt lining of the tray.

I've included the source files to allow for easier modification, as well as .stl files for the tower with no designs so that a custom design can be added.

This is a reupload of my dice box on Thingiverse (link here). Look there for community makes, remixes, and some troubleshooting comments.