M41A Pulse Rifle Keychain — Functional Blaster Toy
_Remember, short controlled bursts._
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a Jouni A.
Archivos (10)
- Foregrip.stl STL · 1,3 MB
- Grenade Launcher Firing Pin.stl STL · 619 KB
- Handle and Stock.stl STL · 1,3 MB
- M41A Pulse Rifle Keychain - Bambu Project.3mf 3MF · 1,8 MB
- Magazine.stl STL · 406 KB
- Main Barrel Firing Pin.stl STL · 342 KB
- Main Body.stl STL · 1,8 MB
- Outer Shell Bottom.stl STL · 557 KB
- Outer Shell Top.stl STL · 1,2 MB
- Stock Clip.stl STL · 73 KB
- Categoría
- Cosplay y props
- Formatos
- STL, 3MF
- Descargas
- 1,001
- Publicado
Sobre este modelo
_Remember, short controlled bursts._
---
Keychain blaster inspired by the M41A pulse rifle from the Alien franchise! It has two barrels that shoot 6mm airsoft BBs that can be stored in the magazine compartment!
Here's a little bonus video of modeling the blaster: https://youtu.be/Wb4YR63v3JI
---
Check out the Keychain Blaster Gift Crate (https://than.gs/m/1155174?affiliateCode=Jaatinen3D) that has an insert for this keychain blaster!
---
---
Printing tips: Parts are oriented in the intended print orientation. Use tree supports for _Outer Shell Bottom_ and _Outer Shell Top_ and normal suports for _Magazine_.
If you use Bambu Studio or OrcaSlicer, a handy project file is included with the print settings I used!
---
Assembly: You'll need two 5mm diameter springs of 20-25mm length, two M3 bolts at least 10mm long — I would recommend 10mm for the underbarrel launcher mechanism and at least 12mm for the main mechanism! See the included assembly video!
Descripción original del autor, publicada en Thangs.
