Low profile, print in place, 60mm hinge.
por Martin en Thingiverse
Designed for box lids, this hinge is held in place with m3 bolts. It opens to around 90 - 120 degrees or so (depending on the bolts used). Has 5mm "pins" with heavy chamfers, so it should be fairly robust. Uses 3mm holes with 40mm spacing along the hinge, and 15mm across the hinge.
Licencia
Uso comercial permitidoCC BY-ND 4.0 — Atribución, sin derivadas
Puedes imprimirlo y compartirlo sin cambios dando crédito; no se permite distribuir versiones modificadas.
Al descargar aceptas respetar la licencia y dar crédito a Martin.
Archivos (1)
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 15,538
- Publicado
Sobre este modelo
Designed for box lids, this hinge is held in place with m3 bolts. It opens to around 90 - 120 degrees or so (depending on the bolts used). Has 5mm "pins" with heavy chamfers, so it should be fairly robust. Uses 3mm holes with 40mm spacing along the hinge, and 15mm across the hinge.
Descripción original del autor, publicada en Thingiverse.
