Low Poly Geometric Succulent Planter with Drainage & Drip Saucer (Two-Tone)
por shellylee3d2 en Cults3D
A crisp, faceted low-poly planter for succulents, cacti and air plants, with a matching octagonal drip saucer. The pot's surface is made of large triangular facets, and a ring of eight navy triangles is inlaid flush into the white pot just below the rim, so the colour is part of the print, not pa...
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalLicencia de uso privado de Cults3D: puedes imprimirlo para ti. No se permite compartir el archivo ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a shellylee3d2.
Archivos (7)
- planter_all_one_plate_H2D.3mf 3MF
- planter_combined.stl STL
- planter_pot_H2D.3mf 3MF
- pot_accent.stl STL
- pot_body.stl STL
- saucer.stl STL
- saucer_H2D.3mf 3MF
- Categoría
- Hogar
- Formatos
- 3MF, STL
- Descargas
- 0
- Publicado
Sobre este modelo
A crisp, faceted low-poly planter for succulents, cacti and air plants, with a matching octagonal drip saucer. The pot's surface is made of large triangular facets, and a ring of eight navy triangles is inlaid flush into the white pot just below the rim, so the colour is part of the print, not paint or a sticker. No text and no logos.
Healthy roots: an 8 mm drainage hole in the centre, plus a cross of 8 mm drain channels under the pot (four low feet), so water can drain into the saucer instead of pooling under the pot. The pot nests into the saucer with about 3 mm of side clearance all around.
Dimensions (measured from the model):
- Pot: 90 x 90 x 80 mm (corner to corner), 83 mm across the flats at the widest point
- Opening: 68 mm across flats / 74 mm corner to corner
- Soil capacity: approx. 325 ml
- Wall: 2.4 mm. Inner floor 5 mm above the table (3 mm floor over the channels)
- Saucer: 89.5 x 89.5 x 16 mm, inner depth 13.6 mm, holds approx. 54 ml
- Height with the pot in the saucer: 82.4 mm
Material: PLA (white body, navy inlay and saucer). For indoor use only; keep out of hot cars and direct sun behind glass. Plant not included.
Descripción original del autor, publicada en Cults3D.
