Lovely Lighthouse - No AMS (or similar system) required
This model makes use of Bambu Lab's Lamp Kit (http://store.bambulab.com/products/led-lamp-kit-001), but should accommodate any light source you have available to you
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesModel License 10-2025
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Eric P.
Archivos (20)
- Door and Window Frames.stl STL · 139 KB
- Front Door.stl STL · 46 KB
- Lighthouse Bottom.3mf 3MF · 520 KB
- Lighthouse Bottom.stl STL · 1,8 MB
- Reflector.stl STL · 246 KB
- Rock Base.3mf 3MF · 8,9 MB
- Rock Base.stl STL · 25,3 MB
- Rock Base_Smol.stl STL · 5,2 MB
- Roof.3mf 3MF · 1,7 MB
- Roof.stl STL · 6,4 MB
- Top Window Frame.3mf 3MF · 120 KB
- Top Windows.3mf 3MF · 102 KB
- Top Windows.stl STL · 216 KB
- Window Panes.stl STL · 12 KB
- Windows and Door.3mf 3MF · 115 KB
- Deck Joists.stl STL · 111 KB
- Deck Railing.stl STL · 1,3 MB
- Deck.3mf 3MF · 567 KB
- Deck.stl STL · 319 KB
- Lovely Lighthouse Assembly Guide.pdf PDF
- Categoría
- Figuras y arte
- Formatos
- STL, 3MF, PDF
- Descargas
- 566
- Publicado
Sobre este modelo
This model makes use of Bambu Lab's Lamp Kit (http://store.bambulab.com/products/led-lamp-kit-001), but should accommodate any light source you have available to you
It's a friggin' LIGHTHOUSE! PRINT IT FOR YOUR OWN SANITY!
This cute lighthouse was designed after the same style that my Cozy Cabin (https://than.gs/m/1213600) was designed. Print it. Assemble it. Do the things and accomplish the stuff!
Assembly Instructions: Refer to the attached guide for assembly or Watch this video (https://youtube.com/shorts/Y5buO2AbsGw?si=aQtI3kNHq5IdkMQX) (The Deck trusts are already attached in the video. You'll have to glue them in)
Printing Instructions:
All parts should be oriented in the way they were intended to be printed.
Several components of this lighthouse utilize the "color swap" technique to mimic the capabilities of a multi-color printer. Anyone with a printer with pause capabilities can do color swaps.
No supports needed!
When printing the reflector, choose a filament that reflects like white or silver.
There are 3mf files included that were created from Bambu Slicer that already have the settings below applied.
Window frames and Door frame (Windows and Door.3mf): - Layer Height: 0.1mm - First Layer Height: 0.1mm - Pause at Layer 3 for color swap
Top Windows: - Layer Height: 0.2mm - Wall Generator: Aracne
Top Window Frame: - Layer Height: 0.2mm - Wall Generator: Aracne
Everything else: - Layer Height: 0.2mm
Don't be afraid to give me feedback if you feel something can be improved!
For those who are curious: Rock Base: Polymaker PolyTerra Cappuccino PLA Top windows: Protopasta translucent white PLA
Feel free to join my discord (https://discord.gg/tdxE35eZwF) for additional support, questions, or suggestions!
Descripción original del autor, publicada en Thangs.
