Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case
por Pirion en Printables
A compact 3D-printable enclosure designed for the Sonocotta Louder ESP32-S3 Rev J2 audio amplifier board.
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo sin pedir permiso ni dar crédito.
Al descargar aceptas respetar la licencia y dar crédito a Pirion.
- Categoría
- Tecnología
- Formatos
- 3MF
- Descargas
- 0
- Publicado
Sobre este modelo
Louder ESP32-S3 Rev J2 – Compact Friction-Fit Case A compact, 3D-printable enclosure designed specifically for the Sonocotta Louder ESP32-S3 Rev J2 audio amplifier board. Features - Two-piece design: base and removable lid
- Tool-free friction-fit closure with 4 rounded retention bumps
- No screws required to secure the lid
- 4 integrated PCB mounting posts
- Dedicated openings for all 3 screw terminals
- Access to both onboard buttons
- USB-C and DC power connector openings
- Ventilation slots
Recommended print settings - Material: PETG
- Layer height: 0.20 mm
- Perimeters: 3
- Infill: 20%
- Printer tested: Prusa CORE One+ Gen2
Assembly - Print the base and lid.
- Install the Louder ESP32-S3 Rev J2 PCB.
- Press the lid into place.
- The four rounded retention bumps hold the lid securely without screws.
Compatibility Designed and physically tested with the Louder ESP32-S3 Rev J2. Other PCB revisions may require adjustments. Credits Based on the official Sonocotta hardware documentation and PCB layout. https://github.com/sonocotta/esp32-audio-dock Independent community-designed enclosure, not an official Sonocotta product.
Descripción original del autor, publicada en Printables.
