Lithophane Light Box
por Anton en MyMiniFactory
Can be printed without support and as little as 5% infill with 3 perimeters and 5 top layers. Uses 90x90mm lithophanes that are max 3mm thick, but 2.8mm recommended, depending on your printer. Just add your own light, a back panel with a small hole for electrical cables has also been provided.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Anton.
Archivos (5)
- lithophanelightbox.stl STL
- lithophanelightboxbackbranded.stl STL
- lithophanelightboxbacklargerhole.stl STL
- lithophanelightboxbacknohole.stl STL
- lithophanelightboxlid.stl STL
- Categoría
- Organización
- Formatos
- STL
- Descargas
- 2,973
- Publicado
Sobre este modelo
Can be printed without support and as little as 5% infill with 3 perimeters and 5 top layers. Uses 90x90mm lithophanes that are max 3mm thick, but 2.8mm recommended, depending on your printer. Just add your own light, a back panel with a small hole for electrical cables has also been provided.
Descripción original del autor, publicada en MyMiniFactory.
