Lithophane House
por Daniel Ullrich en MyMiniFactory
Lithophane house. You must make sure the picture is sized to 800x800 and then, through 3Dprinting rocks, set the image to NORMAL, maximum size of 125mm, 3mm thickness max, 3mm boarder, leave base and stand depth and curve all at 0.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalMyMiniFactory - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Daniel Ullrich.
Archivos (2)
- base.stl STL
- roof.stl STL
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 441
- Publicado
Sobre este modelo
Lithophane house. You must make sure the picture is sized to 800x800 and then, through 3Dprinting rocks, set the image to NORMAL, maximum size of 125mm, 3mm thickness max, 3mm boarder, leave base and stand depth and curve all at 0.
The hole in the bottom is large enough to put a wall plug through, so you can use most light fixtures, including a standard LED bulb.
Use supports for the base only, supports are not needed for the roof.
Descripción original del autor, publicada en MyMiniFactory.
