Layered Christmas Tree Ornament
por woodbetweenstudio3d en Cults3D
A flat-backed Christmas tree ornament with four stepped tiers, a short trunk, and a hanging loop. Each tier stands a little prouder than the one below it, so the tree reads as layered when hung or when light hits the steps. Designed as original parametric geometry in OpenSCAD by Wood Between Stud...
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalLicencia de uso privado de Cults3D: puedes imprimirlo para ti. No se permite compartir el archivo ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a woodbetweenstudio3d.
Archivos (1)
- christmas_tree_ornament.stl STL
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
A flat-backed Christmas tree ornament with four stepped tiers, a short trunk, and a hanging loop. Each tier stands a little prouder than the one below it, so the tree reads as layered when hung or when light hits the steps. Designed as original parametric geometry in OpenSCAD by Wood Between Studio — not an AI-generated mesh, and not a scan of an existing object.
The back is a 2.2 mm flat plate. The raised pads are inset from the silhouette so the edges stay clean. The loop is in the same plane as the back and has a 7.2 mm inside diameter. Print with the back on the bed; the tiers rise in +Z and need no supports.
Verified size of the included STL: 52.88 × 79.10 × 6.80 mm. Volume: 5.90 cm³.
Print settings:
- Print with the flat back on the bed. No supports.
- 0.4 mm nozzle, 0.2 mm layer height.
- 3 perimeters, 15–20% infill.
- PLA or PETG. A brim is optional if bed adhesion is weak.
- Units are millimeters.
The listing images are renders of the 3D model, not photographs of a printed part.
Descripción original del autor, publicada en Cults3D.
