LAST LOG - Fireplace Tea Organizer

A cozy home for your tea.

LAST LOG turns your tea corner into a tiny fireside retreat. Rounded ivory bricks frame a stack of sculpted logs, with your favorite individually wrapped tea bags tucked just behind them. Lift the burgundy mantel to refill, choose a sachet through the front, and settle in for a cup.

The shallow mantel doubles as a small tray for dry, wrapped sachets. A little fireplace with an everyday purpose.

THREE PRINTED PIECES • One two-color facade with the logs permanently integrated. • One rear storage body. • One removable mantel tray. No screws, separate pins or individual bricks to assemble. Four locating joints align the facade with the body; dry-fit first, then use a little suitable adhesive if you want a permanent connection. These joints are not snap locks. Keep the top tray removable.

WHAT’S INCLUDED • One editable 3MF project with all three pieces arranged across two plates. • Aligned facade color-region STLs, rear-body STL and tray STL. • A merged single-color facade STL for printing without AMS and optional painting.

SIZE & TEA FIT Approximately 184 × 117 × 189 mm assembled at 100% scale. Recommended usable storage space: approximately 104 × 62 × 125 mm. Designed around individually wrapped packets up to approximately 90 mm wide × 100 mm tall. Packet thickness and shape vary, so check your preferred tea before printing. The preview packets measure 72 × 85 mm. Packet capacity and front access have not been physically tested.

PRINTING Plate 1: ivory facade and brown logs as ONE multicolor object, flat rear face on the bed. Plate 2: upright ivory rear body and flat burgundy tray, side by side. Supports are disabled for all parts. The flat facade orientation avoids supporting the arch; small socket roofs use short 6–7 mm bridges.

Starting settings: 0.4 mm nozzle, 0.20 mm layers, 3 walls, 12% gyroid infill and 5 top/bottom layers. Suggested colors: warm ivory, dark brown and burgundy. The supplied multicolor project uses AMS or a compatible system. Without AMS, use the merged facade STL and print the body and tray separately in your chosen colors.

The 3MF uses an X1 Carbon 0.4 mm reference profile. Select your own printer, build plate and filament settings and re-slice. Both layouts, including the checked purge paths, fit inside 250 × 250 mm; all parts are under 250 mm tall. The project contains editable geometry, not ready-to-print G-code. Keep mating pieces at the same scale.