LA1.5 k-factor calibration

This is an advanced calibration, recommended only to experienced users. For more information, read

this article.

Material Layer height | Fastest speed | PrusaSlicer profile</tr>

0.2mm | 45mm/s QUALITY 0.2mm | 60mm/s SPEED 0.3mm | 50mm/s DRAFT

PLA

Download

Download

Download

</tr>

PETG Download Download Download

ASA Download Download Download

PC Download Download Download

NYLON Download Download Download

ABS Download Download Download

HIPS Download Download Download

</table>

If your usual printing temperatures differ feel free to modify the G-Code lines to your needs.

Change the "S" values:

M104 S215 ; Set nozzle temperature (no wait)

M140 S60 ; set bed temp

M190 S60 ; wait for bed temp

M109 S215 ; Wait for nozzle temp

If you have custom printing profiles and you want to generate your own LA15 K-factor values visit the community Marlin k-factor generator Prusa Edition and download at least all '*.js' and the 'k-factor.html'. You can open the k-factor.html in your local browser and enter your values. This is based on Marlin k-factor generator with Prusa specific G-codes and settings.

Naming convention for the G-code files:

LA1_5-"Filament"-"Hotend temp"C-"layer height"mm-"fastest perimeter printing speed"-"Extrusion multiplier"E_mult-"Prusa Slicer Printing profile"-"Printer type"-cal-kfactor.gcode

Example:

LA1_5-PLA-215C-0_2mm-60mms-0_95E_mult-SPEED-MK3S-cal-kfactor.gcode is:

- Linear Advanced 1.5 k factor pattern

- for PLA

- with 215°C hotend temperature