Kvazi.pl Geko25 Custom TPU Parts

These are custom designed TPU parts for the Geko25 from Kvazi.pl (https://www.kvazi.pl). The Geko25 is a 2.5 inch FPV drone from Poland. I have the "Zero" version, which has a 10mm standoff distance between the top and bottom plate. But the only part where that distance is relevant is the camera cage. All the other parts can be used on any version of the Geko25. The parts in this project: -Camera cage (10mm standoff) for the Caddx Ant camera, or any camera that has a 9mm diameter lens and 10mm distance between the front of the lens and the bolt holes, and is 14mm wide. -Vertically orientated battery mount, because laying the battery flat will make it too wide and cause a potential prop strike. -Shelf for a mico VTX like the Happymodel OVX300 and a sturdy ELRS antenna mount. Put the VTX in heat shrink and hot glue it to the shelf. -Upgraded VTX antenna mount that raises the antenna a few millimeters in order to put less of a bend in the antenna wire and to make a bit more distance between it and the ELRS antenna. It also countersinks the mounting bolt to better protect the battery from hitting the bolt in a crash. More info about the Kvazi Geko25 in my video: https://www.youtube.com/watch?v=B_gY2j7h514