Knockturn Alley Book Nook
por Tony Mirabella en Thingiverse
Update 1/20/2021: Added a remixed version that is scaled down to 85%. All parts should easily fit on an Ender 3 or similarly sized printer. Update 1/15/2021: Fixed clearance issue with Facade 4. Added hole for lighting to Facade 2 - Window Box. Update 1/6/2021: Added cut versions of top and bottom..
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Tony Mirabella.
Archivos (56)
- Sign_-_BB_Sign.stl STL · 449 KB
- Facade_1_-_Shelf_x2.stl STL · 6 KB
- Facade_1_-_Window_Box.stl STL · 45 KB
- Facade_1_-_Bowed_Window_x2.stl STL · 482 KB
- Facade_1.stl STL · 993 KB
- Facade_1_-_Storefront.stl STL · 832 KB
- Facade_2_-_Shelf.stl STL · 4 KB
- Facade_2.stl STL · 902 KB
- Facade_3_-_Shelf.stl STL · 5 KB
- Facade_3_-_Roof_Support_x2.stl STL · 22 KB
- Facade_3_-_Window_Box_2.stl STL · 8 KB
- Facade_3_-_Window_Box_3.stl STL · 12 KB
- Facade_3.stl STL · 602 KB
- Facade_3_-_Roof.stl STL · 284 KB
- Facade_4_-_Beam.stl STL · 16 KB
- Facade_4_-_Upper_Stair_Rail.stl STL · 19 KB
- Facade_4_-_Lower_Stair_Rail.stl STL · 250 KB
- Facade_5_-_Window_Box.stl STL · 19 KB
- Facade_5.stl STL · 604 KB
- Facade_6_-_Window_Box_2.stl STL · 8 KB
- Facade_6_-_Window_Box_1.stl STL · 7 KB
- Facade_6_-_Window_Box_3.stl STL · 191 KB
- Facade_6.stl STL · 1,4 MB
- Sign_-_Crystal_Ball_Sign.stl STL · 39 KB
- Sign_-_Spider_Sign.stl STL · 102 KB
- Sign_-_BB_Sign_Hanger.stl STL · 67 KB
- Sign_-_BB_Sign.stl STL · 449 KB
- Facade_3_-_Window_Box_1.stl STL · 13 KB
- Facade_1_-_Bookcase.stl STL · 322 KB
- Facade_1_-_Vanishing_Cabinet.stl STL · 68 KB
- Case_-_Left_Side_Front.stl STL · 33 KB
- Case_-_Top_Left.stl STL · 25 KB
- Case_-_Left_Side_Rear.stl STL · 34 KB
- Case_-_Right_Sidie_Front.stl STL · 30 KB
- Case-_Right_Side_Rear.stl STL · 30 KB
- Case_-_Top_Right.stl STL · 42 KB
- Case_-_Front_Left.stl STL · 16 KB
- Case_-_Rear_Left.stl STL · 64 KB
- Case_-_Rear_Right.stl STL · 69 KB
- Case_-_Front_Right.stl STL · 185 KB
- Case_-_Bottom_Left.stl STL · 4,6 MB
- Case_-_Top_Left_Rear_-_Cut.stl STL · 23 KB
- Case_-_Top_Right_Rear_-_Cut.stl STL · 26 KB
- Case_-_Top_Left_Front_-_Cut.stl STL · 5 KB
- Case_-_Top_Right_Front_-_Cut.stl STL · 19 KB
- Case_-_Bottom_Right_Front_-_Cut.stl STL · 2,3 MB
- Case_-_Bottom_Right_Rear_-_Cut.stl STL · 2,4 MB
- Case_-_Bottom_Left_Rear_-_Cut.stl STL · 2,3 MB
- Case_-_Bottom_Left_Front_-_Cut.stl STL · 2,5 MB
- Case_-_Bottom_Right.stl STL · 4,5 MB
- Facade_4.stl STL · 576 KB
- Facade_2_-_Window_Box.stl STL · 8 KB
- Facade_3_-_Door.stl STL · 51 KB
- Facade_2_-_Beam.stl STL · 16 KB
- Facade_1_-_Window_Box_Cut_-_Upper.stl STL · 12 KB
- Facade_1_-_Window_Box_Cut_-_Lower.stl STL · 32 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 33,866
- Publicado
Sobre este modelo
Update 1/20/2021: Added a remixed version that is scaled down to 85%. All parts should easily fit on an Ender 3 or similarly sized printer. Update 1/15/2021: Fixed clearance issue with Facade 4. Added hole for lighting to Facade 2 - Window Box. Update 1/6/2021: Added cut versions of top and bottom for smaller printers. Changed the name of a few files for clarification. Update 1/5/2021: Added models for the bookcases and Vanishing Cabinet. These go in the upper floors of Borgin & Burke's. This is a "book nook" inspired by the Knockturn Alley location in the fictional world of Harry Potter. The files may not be perfect, so be forewarned. Assembled with M5 screws, cheap 2" hinges, and obscene amounts of super glue. The bars below the bowed windows of Borgin & Burkes are just straightened paper clips. While the main structure of the model is my work, many of the various props used to bring it to life were collected from all over Thingiverse. Ornate wall lamp: here. Potion bottles: here. Barrel & LED Lantern: here. Cauldrons: here. Crates: here. Barrels: here. Hanging lights: here.
Descripción original del autor, publicada en Thingiverse.
