Kingroon KP3S 3D Touch / BLTouch Mount

his 3D-printable mount is designed for installing a 3D Touch / BLTouch auto bed leveling sensor on the Kingroon KP3S.

The mount positions the leveling sensor securely next to the hotend while keeping the probe accessible and properly supported. It is designed to fit the KP3S print head and provides a simple and practical way to upgrade the printer with automatic bed leveling.

The design consists of two printable parts, making installation and access to the sensor straightforward.

Features:

Designed for Kingroon KP3S Compatible with 3D Touch / BLTouch-style sensors Two-part printable design Secure sensor positioning Easy installation and removal Provides access to the sensor and connector Suitable for an Auto Bed Leveling upgrade After installation, make sure to configure the correct firmware, probe position, and Z-offset before printing.

Required Components

3D Touch Auto Bed Leveling Sensor Kit (Sensor, Cable, Mount & Screws)

https://s.click.aliexpress.com/e/_c3ekRiNf

https://s.click.aliexpress.com/e/_c42W6fRJ

MicroSD Card - 8GB

https://s.click.aliexpress.com/e/_c4mXI49n

https://s.click.aliexpress.com/e/_c4XpnSWp

MicroSD Card Reader

https://s.click.aliexpress.com/e/_c3aYISTj

https://s.click.aliexpress.com/e/_c3gexwud

Kingroon KP3S Pro 3D Printer

You can watch the complete installation, wiring, firmware setup, and calibration process in my YouTube video using the link below:

https://www.youtube.com/watch?v=gP-WUHUhvvM