JoJo Reef 05 - Shelf Pebble (2-part PETG)

Shelf Pebble — model 05 This is the small arch-shaped rock I made for my lagoon tank. A few round shelves on top, with space underneath. The download has two pieces: print them on the flat cut faces, dry-fit, then glue together. No connectors. Assembled size: about 120 x 81 x 59 mm. These are my real print photos. In the pictures with two rocks, this model is the shorter arch on the right; the taller one on the left is model 04. Photos show earlier prints. They are not a claim that the latest settings have all been physically tested. The downloadable Bambu Studio project uses the RIGHT 0.4 mm nozzle and AMS on an H2C. PETG Basic for the model/support trunks and Bambu Support for PLA/PETG at interfaces. 0.20 mm layers, 5 walls and 100% infill. Open as a complete project and check the real AMS slots. This right-nozzle revision passed native reopen and slicing. Watch the first test print and stop if paths curl or plastic builds up on the nozzle. The shape started with AI-generated geometry, then I edited it and prepared it for printing. Aquarium chemistry and long-term livestock safety have not been tested. Digital files for personal printing. The five-model collection, or a way to support my work: https://www.patreon.com/JoJoReef3D/posts/five-reef-rocks-173160785