Jewelry tree

Simple tree jewelry holder. Print instructions Version edited means that stl files have been changed for Prusa MK3/S/S+. All you have to do is download and slice them. Version 100 means the stl files are unedited but they are larger than Prusa MK3/S/S+ print area. You can still use them and change their size on your own or use them for bigger printers. Print both .stl files from some nice looking filament. It really doesn't matter which type of filament you use on this model. Completing Printed parts connect with super glue or some epoxy. If you want it to be more stable and solid, put a screw through hole in the base and screw it in the tree trunk. After completing there shouldn't be any gap between tree and tray. For easy connection use sandpaper and slightly sand the wedge on bottom of the tree. Idea This model is inspired by [PI:P] Schmuckbaum designed by qed* Design and made by Koziol. Small changes from original design were made, Like different angles between branches for easier modeling or removing birds for easier printing.