Jewelry Stand for Necklaces
por annki en Printables
A castle-like minimalist first try at a holder for necklaces or thin bracelets to hang next to each other
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a annki.
Archivos (7)
- Jewelry-Stand-Necklace_178mm 2023-03-06 15_36_47.stl STL · 21 KB
- Jewelry-Stand-Foot_178mm 2023-03-06 15_37_16.stl STL · 2 KB
- Jewelry-Stand-Foot_2 2023-03-08 11_01_16.stl STL · 2 KB
- Jewelry-Stand-Foot_178mm 2023-03-06 15_37_16_0.2mm_PLA_MINI_1h37m.gcode GCODE · 1,6 MB
- Jewelry-Stand-Necklace_178mm 2023-03-06 15_36_47_0.2mm_PLA_MINI_1h34m.gcode GCODE · 1,8 MB
- Jewelry-Stand-Foot_2 2023-03-08 11_01_16_0.2mm_PLA_MINI_1h36m.gcode GCODE · 1,4 MB
- Jewelry-Stand-Necklace&Foot_178mm 2023-03-06 15_36_47_0.2mm_PLA_MINI_3h46m.gcode GCODE · 3,4 MB
- Categoría
- Organización
- Formatos
- STL, GCODE
- Descargas
- 1,101
- Publicado
Sobre este modelo
This is one of my first tries at 3D models. The jewelry stand is somewhat minimalist and reminds me of a castle. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width. Feel free to modify those to customize it for the length of your necklaces. There are two options for the foot of the stand, one with the groove is either in the middle or to the side. Both work equally well, with the one to the side the supports are easier to get out while the one to the middle looks a bit better in my opinion. When printing this it seems a bit flimsy, for me though it has not fallen over and serves its purpos. For this model I will be working on a castle like decoration for the side or something similar : )
Descripción original del autor, publicada en Printables.
