Japanese Garden Lantern Lamp
por Keenan Finucan en Thingiverse
Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online. Multiple sizes, XYZ dimensions in mm: 100% Scale 222, 222, 280 91% Scale...
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Keenan Finucan.
Archivos (13)
- Top.stl STL · 31,1 MB
- Top_Repaired.3mf 3MF · 6,5 MB
- Center.stl STL · 673 KB
- Base_With_Socket.stl STL · 1,9 MB
- Base_No_Socket.stl STL · 1,8 MB
- 91_Top.stl STL · 31,1 MB
- 91_Top_Repaired.3mf 3MF · 10,5 MB
- 91_Center.stl STL · 673 KB
- 91__Base_With_Socket.stl STL · 1,9 MB
- 80_Top.stl STL · 31,1 MB
- 80_Top_Repaired.3mf 3MF · 10,5 MB
- 80_Center.stl STL · 673 KB
- 80_Base_With_Socket.stl STL · 1,9 MB
- Categoría
- Hogar
- Formatos
- STL, 3MF
- Descargas (todas las plataformas)
- 36,036
- Publicado
También en
Sobre este modelo
Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online. Multiple sizes, XYZ dimensions in mm: 100% Scale 222, 222, 280 91% Scale 202, 202, 255 (Fills Ultimaker original printbed) 80% Scale 178, 178, 225 The 100% version has a STL with a no-socket base that can be scaled for a lantern of any size. The versions with sockets must be built as scaled. Low wattage bulbs recommended. Photographed model was built with 0.2mm layers and 15% infill. It was spray painted with primer and a textured stone paint (American Accents from Rustoleum). Please consider sharing a make! Update 1/19/22: New files for "top". These have been repaired and will slice more reliably.
Descripción original del autor, publicada en Thingiverse.
