Iron Man Mark III Helmet Separated and Oriented
por Kersey Fabrications en Printables
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to…
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Kersey Fabrications.
Archivos (11)
- KF_helmet4-2.stl STL · 3,9 MB
- KF_helmet4-1.stl STL · 4,3 MB
- KF_helmet4-4.stl STL · 2,0 MB
- KF_helmet4-3.stl STL · 3,9 MB
- KF_helmet2-2.stl STL · 20,5 MB
- KF_helmet3-1.stl STL · 4,1 MB
- KF_helmet3-2.stl STL · 29,2 MB
- KF_helmet5.stl STL · 4,4 MB
- KF_helmet2-1.stl STL · 9,8 MB
- KF_helmet1.stl STL · 4,5 MB
- SOURCES.txt TXT · 1 KB
- Categoría
- Cosplay y props
- Formatos
- STL, TXT
- Descargas
- 1,931
- Publicado
Sobre este modelo
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A YouTube video will be available to demonstrate my methodology for this remix. I hope this helps everyone make better helmets!
Print Settings
Printer Brand:
Creality
Printer: Ender 5
Rafts:
Doesn't Matter
Supports: Yes
Resolution:
0.12mm
Infill: 20%
Filament: U.S. Monofilaments PLA Red and Grey Post-Printing =============
Post processing on this will require putty/resin/filler or some kind, sanding, painting, and polishing. You can check out my YouTube channel for more information as I publish videos.
Category: Costume
Descripción original del autor, publicada en Printables.
