iPhone Case - 7/7Plus, 8/8Plus, X, XS, XS Max, XR
por DuaneIndeed en Cults3D
iPhone models supported: iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, and iPhone XR.
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a DuaneIndeed.
Archivos (43)
- iPhone_7Plus_001.stl STL
- iPhone_7Plus_AppleMark_001.stl STL
- iPhone_7Plus_Circle_001.stl STL
- iPhone_7Plus_DecoRays_001.stl STL
- iPhone_7Plus_Palms_001.stl STL
- iPhone_7Plus_Pineapple_001.stl STL
- iPhone_7Plus_WavyRays_001.stl STL
- iPhone_7_001.stl STL
- iPhone_7_AppleMark_001.stl STL
- iPhone_7_Circle_001.stl STL
- iPhone_7_DecoRays_001.stl STL
- iPhone_7_Palms_001.stl STL
- iPhone_7_Pineapple_001.stl STL
- iPhone_7_WavyRays_001.stl STL
- iPhone_XR_001.stl STL
- iPhone_XR_AppleMark_001.stl STL
- iPhone_XR_Circle_001.stl STL
- iPhone_XR_DecoRays_001.stl STL
- iPhone_XR_Palms_001.stl STL
- iPhone_XR_Pineapple_001.stl STL
- iPhone_XR_WavyRays_001.stl STL
- iPhone_XR_WavyRays_001.stl STL
- iPhone_XSMax_001.stl STL
- iPhone_XSMax_AppleMark_001.stl STL
- iPhone_XSMax_Circle_001.stl STL
- iPhone_XSMax_DecoRays_001.stl STL
- iPhone_XSMax_Palms_001.stl STL
- iPhone_XSMax_Pineapple_001.stl STL
- iPhone_XSMax_WavyRays_001.stl STL
- iPhone_XS_001.stl STL
- iPhone_XS_AppleMark_001.stl STL
- iPhone_XS_Circle_001.stl STL
- iPhone_XS_DecoRays_001.stl STL
- iPhone_XS_Palms_001.stl STL
- iPhone_XS_Pineapple_001.stl STL
- iPhone_XS_WavyRays_001.stl STL
- iPhone_X_001.stl STL
- iPhone_X_AppleMark_001.stl STL
- iPhone_X_Circle_001.stl STL
- iPhone_X_DecoRays_001.stl STL
- iPhone_X_Palms_001.stl STL
- iPhone_X_Pineapple_001.stl STL
- iPhone_X_WavyRays_001.stl STL
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 1,800
- Publicado
Sobre este modelo
iPhone models supported: iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, and iPhone XR.
These are low profile cases with smooth contours. The models are designed to print reliably, and should be a very durable solution.
The specs for each phone were taken directly from Apple's published drawings for making compatible iPhone accessories. I have been testing various designs for about two years, and have printed dozens of cases that I have tested in that time. The models are pre-scaled to precisely snap onto the phone.
*iPhone 8 Note: The 8 (and 8 Plus) are almost (within 0.2mm) exactly the same size as the 7 (and 7 Plus). Use the 7 models for the 8. Scale the 7/7Plus models in your slicer to get the best fit for an iPhone 8/8Plus: Height(Z) = 102.82%; Length(Y) = 100.07%; Width(X) = 100.30%.
My original designs, from two years ago, are at https://www.thingiverse.com/thing:2327392
28-Jun-2019: Expanded XR camera opening to include the flash and microphone.
Descripción original del autor, publicada en Cults3D.
