iPhone 13 Pro Lattice Cases

Hands down the best 3D printable phone case for your iPhone 13 pro. I have been working on the design since the release of the phone, slowly tweaking it to get the fit just right.

3D Printing Filament The case body should be printed out of NinjaTek Cheetah (https://www.matterhackers.com/store/c/NinjaTek/ninjatek-cheetah-series?aff=7480) or any TPU with a hardness of 95A:

The camera protector, volume rocker, and power button should be printed out a of a rigid plastic (PLA, ABS, PETG, etc.). My favorite is silk gold pla (https://www.matterhackers.com/store/l/silky-gold-mh-build-series-pla-filament-175mm-1kg/sk/MAQNPYVJ?aff=7480)

This is not a dual extrusion print. Print the components separately

3D Printing Settings: Infill: 100% Top/Bottom Layers: 3 Perimeter Shells: 2 Support: Yes - it is needed on the inside overhang - consult picture Nozzle Diameter: 0.35 mm Extrusion Width: 0.4 mm Layer Height 0.2 mm

Assembly THE CAMERA PROTECTOR IS NOT A SQUARE. IT IS SLIGHTLY LONGER FROM TOP TO BOTTOM WHEN HOLDING THE PHONE UPRIGHT

You can use a small amount of super glue to hold the buttons in place although this not necessary once that phone has been placed in the case.

Socials: Youtube (https://www.youtube.com/c/drdflo) Instagram (https://www.instagram.com/dr.dflo)

Please note that affiliate links are present to support the creation of these models.