Interior Glass Mount for WOLFBOX G840S Rear Camera
por sina chavoshi en Printables
Cradle that mounts a WOLFBOX G840S (or similar) rear dashcam camera inside the car, taped to the glass.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a sina chavoshi.
Archivos (1)
- Categoría
- Repuestos
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
A trapezoidal cradle that mounts the rear camera of a WOLFBOX G840S dashcam (or a similar rear camera) on the inside of a car or truck, against the glass, instead of on the outside. It has a front cutout for the lens, a support floor, triangular side gussets, and wide adhesive wings plus a lower extension for VHB double-sided tape. - Fits a 40 mm (front) / 50 mm (back) × 35 mm deep × 32 mm tall camera
- Overall 102 × 35 × 55 mm, 3 mm walls
Customize it in your browser This model is fully parametric. Change the camera dimensions, wall thickness and tape wing sizes to fit another camera. Open it in the free OpenSCAD Playground, change the numbers and export your own STL: Open it in OpenSCAD Playground Source The OpenSCAD source and the rest of my models are on GitHub: github.com/SinaChavoshi/3d_printer_agentic_models Designed with AI assistance in OpenSCAD.
Descripción original del autor, publicada en Printables.
