Ichigo Kurosaki | BloodChain Bankai

⚔️ A stylized Ichigo figure, sculpted from scratch in Blender and test printed before release.

Watch Video: How the Model was Created: https://youtu.be/NW3YCwqdeNo 3D Print & Paint: https://youtu.be/ze9i-B6tT_4

📐 Specs • Parts: 3 (figure, base, accessory) • Formats: STL + 3MF

🖨️ Tested print profile • Layer height: 0.2 mm (first layer 0.2 mm) • Nozzle: 0.4 mm • Wall loops: 4 · Sparse infill: grid • Speeds: first layer 50 mm/s · outer wall 150 mm/s · inner wall 200 mm/s · travel 400 mm/s • Acceleration: 10000 mm/s (first layer 500 mm/s) • Supports: tree (auto), slim, threshold 12° • Flow ratio: 0.95

📦 What's included • STL files (per part) • 3MF with the tested profile • Pre-supported plate

⚠️ Note before printing • One part is not fully watertight (8 boundary edges, 6 non-manifold edges on the main body). Run a mesh repair pass in your slicer or in Blender's 3D Print Toolbox before slicing.

🙏 Personal fan-art study. Bleach and its characters belong to Tite Kubo / Shueisha. Not for commercial resale.

One Important Info: When i printed my version based on these settings, the moons 3d printing failed. So i had to Re-print it. You can see the youtube video, i have showcase my print timelapse there.