Hydroponic Planting System - Modular
por Alexandru Hauzman en Printables
Modular Hydroponic Planting System
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Alexandru Hauzman.
Archivos (31)
- Water_Filter.stl STL · 7,5 MB
- Insert_Filter_Dispencer.stl STL · 6,1 MB
- 3x_Module v26.3mf 3MF · 1,2 MB
- 1x_Pot_Plant _Holder v42.3mf 3MF · 653 KB
- Top_Lid v15.3mf 3MF · 92 KB
- Filling_Cap v16.3mf 3MF · 511 KB
- Cap v1.3mf 3MF · 251 KB
- Filling_Module v23.3mf 3MF · 372 KB
- Water_Dispenser_Module v16.3mf 3MF · 569 KB
- 3x_Pot_Plant _Holder v42.3mf 3MF · 658 KB
- Top_Lid_Hose_Adapter.3mf 3MF · 307 KB
- Hose _Adapter.3mf 3MF · 532 KB
- Water_Didpencer_exterior watering.3mf 3MF · 478 KB
- Water_Filter_Module.3mf 3MF · 349 KB
- 22mm_Pipe_Adapter v4.stl STL · 2,8 MB
- Bucket_Adapter v9.stl STL · 149 KB
- Cap v1.stl STL · 1,0 MB
- Filling_Cap_Symbol.stl STL · 66 KB
- Filling_Cap v16.stl STL · 2,1 MB
- Top_Lid v15.stl STL · 315 KB
- Top_Lid_Hose_Adapter.stl STL · 1,1 MB
- Hose _Adapter.stl STL · 1,8 MB
- Top_Lid.stl STL · 545 KB
- Top_Lid.stl STL · 545 KB
- Water_Dispenser_Module v16.stl STL · 2,3 MB
- Water_Didpencer_exterior watering.stl STL · 1,9 MB
- Water_Didpencer_exterior watering.step STEP · 397 KB
- Water_Didpencer.step STEP · 412 KB
- Pot_Plant _Holder v42.stl STL · 2,3 MB
- 3x_Module v26.stl STL · 4,2 MB
- Filling_Module v23.stl STL · 1,2 MB
- Categoría
- Jardín
- Formatos
- STL, 3MF, STEP
- Descargas
- 2,976
- Publicado
Sobre este modelo
Hydroponic Planting System is a remix is not only my designee, and I think maybe some of you will like and need one I have adapted to my designee the pot support and the lock mechanism. The module has 3x planting spot's with a 3mm wall thickness Here is the original from what I used as a reference https://www.thingiverse.com/thing:3405964 If you want to ad a water pump in the interion of the module there is a tube/ hose holder Note: I will leave in the description the Version to be more easy to follow if there are some changer Update : 15.11.2022 - add water_dispencer_module .stp file on request
10.08.2022 - add water/dirt filtering module- you can use sponge ore something what you consider it can filter the dirt what falls down
- add insert in case you want a gap
02.04.2021 - add 22mm pipe adaptor ( can be adapted also to a bucket- there are hole's in case you need to fix it
- Bucket adapter ( 127mm diameter )
03.04.2021 - Add 3mf file ( for this file i used 0.3 draft profile with 100% infill but you can change it if you want )
Ho wants to add a water pump i found on Aliexpress a pump what should be ok for self watering https://a.aliexpress.com/_mrormFp 08.04.2021 Add a new Top Lid & Water Dispenser so it can be attached a hose from exterior to not only form interior (in case you make a bigger system and add only one water pump ) I have made some test with the new top Lid but did not print completely I made some test if the adapter can be screwed in the Lid ( attached dome picture ) Print instructions Printer Brand: Prusa Printer: MK3S+ Rafts: No Supports: No Resolution : 0.2 you can try 0.3 - The plant module I made with 0.20 mm Quality Profile ( standard no changes ) - The water dispenser & cap I made with 0.3 mm, I will try with 0.3 also the module
Infill: at least 20% - You may need to use Brim for the 3x_Module because there is a thick area what is touching the bed and the print is big also the print time is long.
Filament : Prusament PETG > Black & White, but i think also PLA will be good
Notes: I printed with 3 wall to ensure that there is no leakage
Descripción original del autor, publicada en Printables.
