Hole diameter test M3/M4
por Vojtěch Pošík en MyMiniFactory
This model was made for testing a tighness of M3/M4 screws in holes of my 3D printed models. Holes have diameters from 2,6 to 4,3 mm. I found out that ideal hole diameter for M3 screws is 2,9-3,0 if you want the screw to be tight in, but every 3D printer has it own deviations.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Vojtěch Pošík.
Archivos (1)
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 243
- Publicado
Sobre este modelo
This model was made for testing a tighness of M3/M4 screws in holes of my 3D printed models. Holes have diameters from 2,6 to 4,3 mm. I found out that ideal hole diameter for M3 screws is 2,9-3,0 if you want the screw to be tight in, but every 3D printer has it own deviations.
Descripción original del autor, publicada en MyMiniFactory.
