HO Scale Wye Railroad Bridge

HO Scale Wye Railroad Bridge – Project Summary Scale: HO (1:87) 3D Printer: Flashforge Adventurer 5M Printer Build Area: 220 × 220 × 220 mm Original Bridge Length: 250 feet HO Scale Length: Approximately 876 mm (34.5 inches) Bridge Design The Wye Railroad Bridge was recreated using your original STL files. The model includes: - Railroad bridge deck sections - Left and right side trusses - End and middle truss sections - Overhead trusses and cross bracing - Structural supports - Railroad ties and rails in the assembled reference Modifications for 3D Printing The original deck and truss pieces were too long for your printer. The bridge was redesigned with shorter sections. Feature Final design Scale 1:87 HO Maximum piece length Approximately 111 mm Printable STL files 32 Assembly Separate sections joined together Complete reference One assembled STL Overall length Approximately 876 mm

Files Created Shortened Bridge Kit: Contains 32 separate STL files for printing the deck, trusses, and bracing. Assembled Bridge Reference: Shows the complete bridge with all sections positioned together. Printing Recommendations Print the deck and trusses separately, laying pieces flat whenever possible. Test-fit the sections before gluing. The cut ends may need mesh repair or reinforcement before printing. Final Result The project provides a full-length HO-scale railroad bridge with smaller components designed to fit your Flashforge Adventurer 5M, plus a complete assembled reference showing how everything fits together. The complete bridge will measure approximately 34.5 inches long when assembled.