Hexes for LEGO mini figures (re-modeled)
por Nat en Printables
Show off your minifigs!!
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Nat.
Archivos (8)
- hex_for_minifig_baseplate_open_back.stl STL · 33 KB
- hex_for_minifig_baseplate_open_back_wall_mount.stl STL · 51 KB
- hex_for_minifig_baseplate_full_back.stl STL · 32 KB
- hex_for_minifig_baseplate_full_back_wall_mount.stl STL · 50 KB
- minifig_hex_0.4n_PLA_MK3S_3h21m.gcode GCODE · 6,8 MB
- minifig_hex_0.4n_PETG_MK3S_3h19m.gcode GCODE · 6,9 MB
- minifig_hex_X2_0.4n_PLA_MK3S_6h43m.gcode GCODE · 13,6 MB
- minifig_hex_X2_0.4n_PETG_MK3S_6h38m.gcode GCODE · 13,7 MB
- Categoría
- Figuras y arte
- Formatos
- STL, GCODE
- Descargas
- 4,649
- Publicado
Sobre este modelo
After printing hundreds of originals, I decided to re-model it myself to make some small tweaks and changes. The original OpenSCAD code resulted in slightly misaligned tolerances, needing the tolerance to need to be set higher than necessary and causing more visible gaps. This model's tolerance settings are precisely set and aligned. My minifig wall gets adjusted and rearranged regularly, so I wanted it to be able to remove and replace hexes more easily.
The secret number is 48.
Descripción original del autor, publicada en Printables.
