Heavy Duty Keyboard Holder (No Supports)
por smallr en Printables
It looks good, it works well, it's free and that's all you need! This is my gift to the custom keyboards community.
Licencia
Uso comercial permitidoPuedes usarlo, modificarlo y venderlo; si distribuyes versiones modificadas deben ir con la misma licencia y sus fuentes.
Al descargar aceptas respetar la licencia y dar crédito a smallr.
Archivos (17)
- keyboardHolder_80P.stp STP · 618 KB
- keyboardHolder_80P_GRIP.stp STP · 1,1 MB
- keyboardHolder_80P.stl STL · 1,4 MB
- keyboardHolder_80P_GRIP.stl STL · 2,6 MB
- keyboardHolder_heavyDuty.stl STL · 4,0 MB
- keyboardHolder_heavyDuty.stp STP · 1,5 MB
- keyboardHolder_fullGrip.stl STL · 3,7 MB
- keyboardHolder_fullGrip.stp STP · 1,5 MB
- keyboardHolder_fullSmooth.stl STL · 1,9 MB
- keyboardHolder_fullSmooth.stp STP · 1,3 MB
- keyboardHolder_halfSmooth.stl STL · 1,5 MB
- keyboardHolder_halfSmooth.stp STP · 1,1 MB
- keyboardHolder_halfGrip.stl STL · 2,6 MB
- keyboardHolder_halfGrip.stp STP · 1,3 MB
- keyboardHolder_logo.stl STL · 445 KB
- keyboardHolder_logo.stp STP · 1,9 MB
- keyboardHolder_logoThin.stl STL · 444 KB
- Categoría
- Tecnología
- Formatos
- STP, STL
- Descargas
- 1,611
- Publicado
Sobre este modelo
YouTube video:
This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more free stuff in a world that tries more and more to make you pay for everything. Key features: - looks great and can be printed without any support, just hit print.
- Can hold very heavy keyboards (Neo 65cu or more) (especially the heavy duty variant)
- Simple to print, supports PETG (I recommend printing petg on a smooth PEI sheet to avoid warping)
- Can be printed on most printers (fits core one build surface) but can be scaled for smaller printers.
- Relatively fast to print, I recommend 0.2mm for best result but looks also good at 0.25.
- I recommend at least 25% infill. I printed all mine at 50% but takes quite a bunch of filament.
This design is entirely free, but feel free to support me by giving me super thanks on youtube: https://www.youtube.com/@smallrtech ECO settings: 2 perimeters, 25% infill Adaptive Cubic with Automatic Infill Combination. Recommended settings: 4 perimeters, 50% infill rectilinear. I genuinely dislike AI, it will never be used for anything I make.
Love.
Descripción original del autor, publicada en Printables.
