Headphone Desk Hanger - Clip-on (AI designed from one prompt) + Screw-in Under Desk version

Two headphone hangers for your desk, from my video "AI Designed This 3D Print From ONE Prompt (Claude, Gemini & Fusion 360)". Watch the video (how it was made, the prompt, and the Fusion 360 walkthrough): https://youtu.be/kokbTCuuwyM 1. Headphone desk hanger.stl (clip-on, no screws) Slides onto the front edge of the desk and hangs below it. Designed, exported and made print-ready 100% by AI from a single prompt (Claude working inside Tinkercad). The exact prompt is in the video description so you can change the numbers for your own desk. - Desk slot: 18 mm tall x 45 mm deep (my desk is 18 mm thick; edit the prompt for yours) - Overall size: 66 x 30 x 90 mm - Hook: 45 mm foot with a 22 mm lip

2. Under Desk Hanger.stl (screw-in, bonus) The version I drew in Fusion 360. Screws under the desk with two screws, sits further out of the way, but is harder to move around. - Overall size: 70 x 80 x 40 mm - Two screw holes in the mounting plate

Print settings - Material: PLA or PETG - Layer height: 0.2 mm - Walls: 3-4, infill: 20-30% - Orientation: lay it on its side (the flat profile face on the bed), no supports needed - Printed on a Creality Hi, red PLA

Free to download and print. If you have a more complicated idea you want to try with AI, leave it in the video comments. More builds at youtube.com/@techs.passion and techspassion.com.