Hanging Planter
por Gazzaladra en Thangs
A creative hanging planter for your home or garden.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesStandardDigitalFileLicense
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Gazzaladra.
Archivos (1)
- hanging_planter.stl STL · 11,0 MB
- Categoría
- Figuras y arte
- Formatos
- STL
- Descargas
- 495
- Publicado
Sobre este modelo
A creative hanging planter for your home or garden.
What you need: - The 3d printed thing - Yarn with about 3mm in diameter (can be flax, hemp, whatever)
The assembly instructions are in the images.
Size: 90 × 80 × 170 mm
Print settings Required build volume: 90 x 90 x 180 mm Material usage: 110g Print time: 10h
Material: PLA Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0.28 mm Outer walls: 3 Infill: 15% Build plate adhesion type: brim
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Descripción original del autor, publicada en Thangs.
