H3C Downward Tilt Screen Adapter

Boost MeBought a giant printer. Forgot to be a giant. If this saved you from needing a boost to see your screen, please consider sending it my way. Us little people could use one. 😂🤣H3C Downward Tilt Screen Adapter Prints in one piece with NO SUPPORTS required. Installs with the screen’s ribbon cable connected.

The H3C is a tall printer, but its stock screen only faces straight ahead or tilts upward. For children, shorter users, or anyone with the printer on a high workbench or shelf, that can make the display difficult to see. This adapter gives the screen a downward viewing angle while keeping the original hinge adjustment. You can still move the screen toward straight or upward, and the glass door clears the screen even at full downward tilt, as tested on my H3C.

Installation is simple. Release the screen from its mount, slip the adapter over the connected ribbon cable through the side opening, attach it to the printer and secure the screen onto the mount until you hear a click.

- Prints as a single piece with integrated mounting hooks.

- Uses the original screen hinge and latch.

- Installs around the connected ribbon cable.

Print in the supplied orientation with supports turned OFF.

Inspired by FauxHammer’s H3C review, which highlighted the missing downward screen tilt for printers placed on shelving or racking. Watch the relevant section starting at 4:20.